SynPower™ Full Synthetic Motor Oil
Don’t let heat and stress steal engine performance.
Valvoline Full Synthetic motor oil is specially formulated to provide enhanced engine protection against heat, deposits and wear. Through its advanced formulation, Valvoline Full Synthetic provides extra detergents and dispersants that provide maximum sludge and deposit protection, along with premium additives that hold up to high temperatures and friction under severe driving conditions.
SynPower™ Full Synthetic Motor Oil is formulated to provide enhanced engine protection against heat, deposits and wear. Additional product benefits include:
- Provides excellent engine cleanliness through superior sludge and varnish protection
- Helps reduce engine wear at high temperatures with improved viscosity stability
- Provides outstanding high-temperature protection under severe driving conditions
- Provides superior cold-temperature protection through faster oil flow at start-up
- Formulated with antiwear additives that stay in your oil longer for outstanding protection against friction and wear
- Helps maintain fuel efficiency for the life of the oil*
- Is fully compatible with all conventional and leading synthetic motor oils
- SynPower 0W-20, 5W-20, and 5W-30 meets or exceeds the requirements of GM dexos 1™ Gen 2
Product Part Numbers
|10W-30 Motor Oil||5-Quart||787002||0-74130-00934-9|
|5W-30 Motor Oil||5-Quart||787007||0-74130-00950-9|
|5W-20 Motor Oil||5-Quart||787023||0-74130-74785-2|
|5W-30 MST Motor Oil||Quart||787301||0-74130-17302-6|
|0W-20 Motor Oil||5-Quart||813460||0-74130-56154-0|
|0W-40 Motor Oil||Quart||852518||0-74130-01586-9|
|0W-20 Motor Oil||Quart||VV916||0-74130-00916-5|
|5W-20 Motor Oil||Quart||VV927||0-74130-00927-1|
|10W-30 Motor Oil||Quart||VV935||0-74130-00935-6|
|20W-50 Motor Oil||Quart||VV945||0-74130-00945-5|
|5W-30 Motor Oil||Quart||VV955||0-74130-00955-4|
|5W-40 MST Motor Oil||Quart||VV966||0-74130-00966-0|
To everyone at Valvoline, Of the last three Ford pickups I have driven, one being a 2004 Ford Ranger and the other two being a 2007 Ford F150 and now a 2013 Ford F150, I have used Valvoline products in each of them. From gear oil to grease (grease fittings) to motor oil. I have used maxlife synthetic blend and the full synthetic synpower in each and I must say I have been very satisfied with all your products. I have used valvoline products since I started driving. I know Valvoline is a name I can trust because I know your products have definitely been proven through the test of time. While I was going to college in Northern Maine (a trip that took me 9 hours from where I live) my trucks experienced highway speeds up to 80mph, because North of Bangor, Maine the highway speed limit is 75mph. They also endured hilly terrain, stop and go conditions, very cold temperatures, high humidity, and very dusty conditions on logging roads. I remember one semester at college during the winter where we saw temperatures down to -40F! in fact, there were two solid weeks where the mercury did not get above 0F. Yet, my truck would start every morning and not once did I have any lubrication issue in my truck. The logging roads were really something as well. During the summer months, when temperatures got into the high 80s and low 90s the logging roads would be thick with dust, especially when you would meet a loaded log truck coming towards you. There were times where you would have to sit on the side of the road just to wait for the dust to settle. Essentially, it is safe to say that my trucks have been in some harsh conditions, not necessarily the worst conditions, but with each of these environmental conditions when I would change my oil (I usually run 5,000 mile oil change intervals) the oil would come out nothing less of clean! I have been very impressed and continue to be impressed with the products Valvoline supplies because I know now that my vehicles will most definitely be protected no matter the conditions. So to everyone at Valvoline, Thank you! Thank you for making great products!
- George D., New Hampshire
My first experience with SynPower came after I had taken a brake class at the local community college. I wanted to learn how to work on my brakes properly so I enrolled and first learned what "DOT 3" and "DOT 4" meant. I wanted the best (and safest) for me and my truck so I went to the local auto parts store to get some DOT 4 brake fluid since it had a superior boiling point: approximately 450 degrees compared to the 400 degrees at which DOT 3 boils at. I came across Valvoline's SynPower Synthetic Brake Fluid and found it had a boiling point of 502 degrees! I tried it and loved it! I have to bleed my brakes often (which is why I took that class) because I do a LOT of downhill driving. Ever since I switched to Valvoline's SynPower Synthetic Brake Fluid, I've only had to bleed my brakes ONCE. I visited the website and found out that these guys have been doing this kind if thing for over 135 years. I figured, "If they can make brake fluid this good, I wonder how their motor oil is?" I first tried Valvoline SynPower about 24,000 miles ago and have been using it since. My current car is 1999 Dodge Durango 4X4 with the 5.9 liter engine. Every week, I would fill up with gas, reset my trip computer and drive 30 minutes home. And each time I would average 15.1 miles per gallon, like clockwork. One paycheck I had a little extra left over and decided to try SynPower 10W-30 motor oil. I noticed that my oil pressure was lower but when I made the trip home from Costco, I averaged 15.8 miles per gallon! I documented my trips for the next two months and I found that my mileage really did improve! I did the math and found that the SynPower pays for itself: I'll save more on gasoline than the $23 that the 5 bottles of SynPower cost!" I've grown very attached to my truck and want to keep it forever. Valvoline SynPower will help me do that. And the best part is that it won't cost me anything extra! I have since switched to Valvoline SynPower Power Steering Fluid and Fuel System & Engine Treatment. I have to change the differential fluid in about 700 more miles and I can't wait to put in the Valvoline SynPower 75W-90 gear oil or apply the SynPower NLGI #2 GC-LB grease! Any chance you guys at Valvoline will come up with some SynPower ATF+3 transmission fluid in about 10,000 miles (7 months)?
- Louie G.
I can testify on my own experience that Valvoline's Full Synthetic Oil's performance is giving me 100% protection in my engines since 1983. My 1983 Ford four-cylinder turbo coupe was the first to be protected back when Valvoline was not easily purchased. Before that I could not find synthetic oil. Since then, I have used it in my 1985 Nissan truck, my 1995 Nissan Pathfinder, my 1998 Pathfinder, and now in my 2002 Pathfinder 3.5 SE and our other 2002 Audi 1.8T, A4. I will never use anything else. Oil changes every 10,000 miles in my Audi and every 8,000 miles in my 2002 Pathfinder is safe and I have no problems. Of course, I change the oil myself except in the Audi which is maintenance free, but I bring my Valvoline Full Synthetic 20-30 wt. to the dealer and they put in in for me. Keep up the great work Valvoline...a satisfied customer for 21 years.
- Edward Z., California
Dear Valvoline folks, The "Check Engine" light on my 2002 Hyundai Accent recently lit up. I took the car to the dealer and the problem was diagnosed as a bad component in the ignition system. As a result, one cylinder was firing intermittently and as a result a valve got burned and had to be replaced. While dropping my car off for servicing, I mentioned to the service tech that I baby the car and use nothing but Valvoline's synthetic oil in it. When the repair was completed and I picked up the car, the service tech commented on how clean the inside of the engine was when he pulled the head. He even called the other techs over to marvel at the state of things in my engine. Up until now, I was "just hoping" that the synthetic oil was doing me some good..... but now, I am convinced. Keep up the good work!! I also use nothing but Valvoline's SynPower in my '99 GMC truck.
- Brian M., Alaska
To whom it may concern, Ever since I purchased my car (my first car, which I still drive everyday, an '89 Chevrolet Camaro) I have been using Valvoline engine oil. When I purchased oil for my first oil change, I had NO idea what I was even looking for. A kind gentleman at the local parts store recomended me a Valvoline 10W-30. I liked the way it seemed to "take care of my car." After a year and a half of teenage abuse, and heavy driving on the 145,000 mile engine in my Camaro, a nice blue smoke started coming out of the exhaust. I then switched to the Valvoline's MaxLife to treat my problem. Within only a few weeks, the burning oil seemed to fade all but completely. That kept my car going for another 6 months until I decided to utilize my recently aquired knowledge of cars and engines to build a powerhouse 400 horsepower V-8 for my car. Before I even finished building the engine, I purchased a case of Valvoline's SynPower for breaking in the engine and have been using it ever since (almost a year). A few weeks ago I removed the valve covers for a quick valve adjustment and noticed that the workings of my engine were still AS CLEAN as the day that I assembled the motor. I have to tell you,... You guys make one heck of a product. A product that I plan to use for life. I STRONGLY recommend ANY Valvoline product to anyone who asks. Recently I started showing my car during "after race" car shows at the local drag-strip. Under my hood, on the radiator and front clip cowl, I display all the stickers of companies, products, and parts that I use for my car. Is there any way that you could send me a Valvoline decal or sticker to complement the array of companies that I support and use. I would GLADLY advertise Valvoline products with my other parts and products. Thank you...with much appreciation. Sincerely, Benjamin P.
- Ben P., Texas
I have a 1967 Ford Galaxie 500 with a 289 cubic inch engine. The engine was rebuilt about 20,000 miles ago. I decided to switch it over to SynPower, and I don't think it ran this smooth from the factory! I can tell a big difference in everything...from smoother running, to cooler running, and as well as gas mileage. Thanks for making SynPower...it's one great product!
- Steve F., Kentucky